ADASH A4300 VA3 Pro Ex

Intrinsically safe 3-Channel, Vibration Analyzer, Data Collector

Click below for download 

ADASH A4300 VA3 Pro Ex

 

CONTACT US

Description

ADASH A4300 VA3 Pro Ex is an Intrinsically safe 3-Channel, Vibration Analyzer, Data Collector

 

 

DETAILS OF THIS VIBRATION.

  •  II 3G Ex ic op is IIC T3 GcAdash Atex Ex
    • ready for hazardous areas
  • The A4300 VA3 Pro Ex instrument can be configured according
    to your requirements by choosing measuring modules. There
    are three free modules included in every VA3:

    • Meter
    • FASIT
    • Strobo
  • Other modules are optional:
    • Analyzer
    • Route
    • Balancer
    • Recorder
    • Run Up
    • Ultrasound

 

SPECIFICATION OF ADASH A4300 VA3 Pro Ex

 

Ex certification: II 3G Ex ic op is IIC T3 Gc
Input channels: 3 x AC, ICP® power supply on/off

3 x DC for process values

1 x TACHO for speed probe / external trigger

Input range: AC +/- 12 V peak-peak

DC +/- 24V

AD conversion: 24 bit, 64 bit internal signal processing

No AutoGain function!

Dynamic range S/N: 120 dB
Frequency ranges (-3 dB): Maximum range: 0.5 Hz – 25 kHz (64 kHz sampling)

Minimum range: 0.5 Hz – 25 Hz (64 Hz sampling)

Sampling mode: Fully simultaneous for all 3 channels
FFT resolution: Min. 25 lines

Max. 25 600 lines

Measurement modes: Analyzer – analytical measurements

Data collector – route measurements

Balancer – 1 and 2 plane on site balancing

Recorder – raw signal recording for later post analysis

Run Up – run up and coast down measurements

Ultrasound – measurement of ultrasound in 30 – 50 kHz range

LED stroboscope, LED torch

FASIT – Expert system for automatic fault detection

Vibration meter – basic vibration measurements

Software: Free version of DDS software (limited database size)

Licensed DDS software

Data processing: Real time FFT

DEMOD – ENVELOPE analysis

ACMT – low speed bearing analysis

Order analysis

User band pass analysis

RPM measurement

DC measurement

Orbit measurement

IR temperature measurement:

From -70˚C to +380˚C (-94˚F to +716˚F)

Trigger: Manual, External, Amplitude, Tacho
Display: Colour 240 x 320 pixels, TFT
Interface: USB 2.0, 3.0 compatible
Operating temperature range: -10˚C to +50˚C
Power: Battery pack for more than 6 hours of continous operation
Case: Aluminium – heavy duty
Weight: 780 g
Dimensions: 230 x 82 x 32 mm
Languages: English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish

 

 

CONTACT US

Reviews

There are no reviews yet.

Be the first to review “ADASH A4300 VA3 Pro Ex”

Your email address will not be published. Required fields are marked *